Detail

About sealing machine maintenance

   1, Turn off the power of the equipment and periodically clean the surface of the sealer, the bottom plate and the lower mold slide, the groove, the upper mold inner pressure plate and the positioning rod

   2, For the sealer equipment, the lower skateboard, press rod bearings, eccentric wheels and guide posts and guide rails and other transmission parts must be regularly added butter to ensure the use of machinery and equipment performance.

   3. Clean the sealing cutter,use the cotton ball to plug the two drain holes of the lower die, pour the boiling water into the groove of the lower die, and fill up until it is full, then push the lower die into place, and put the die under the upper die. Pressure, pressure to the lowest point, so that the tooth knife soaked for several minutes until clean, repeated several times.

   Doing the above points can enhance the service life of the sealing machine and the efficiency and quality of the packaging. Nothing remains constant. Long time no use, no maintenance, The equipment will become dull , the quality and speed will be reduced. Therefore, in order to ensure the quality of the packaging of our products, the maintenance of the equipment must be kept in mind. We must not be sloppy.